Fire Extinguisher Inspection Services in Tampa, FL

Annual Fire Extinguisher Inspection

Most commercial properties are required to have portable fire extinguishers inspected at least annually by a licensed inspector, who checks pressure gauges, physical condition, mounting, and accessibility, then applies a dated inspection tag. Local providers serving the Tampa Bay area are familiar with Florida's fire code requirements for this recurring service.

• Pressure gauge and physical condition check on each unit
• Mounting height and accessibility verification
• Dated inspection tag applied to each extinguisher

Fire Extinguisher Recharging

An extinguisher that's been discharged, even partially, or has lost pressure over time needs to be recharged to remain code-compliant and functional. Recharging involves refilling the extinguishing agent, testing the unit, and applying updated certification documentation.

• Refill of extinguishing agent to full capacity
• Pressure testing after recharge
• Updated certification and service tag

Keep in mind: If your extinguisher is simply due for its routine annual check and hasn't been discharged or lost pressure, standard inspection is the service you need, not recharging.

Hydrostatic Testing

Extinguisher cylinders require hydrostatic pressure testing at set intervals -- typically every 5 or 12 years depending on the extinguisher type -- to confirm the tank itself hasn't weakened or corroded to an unsafe point. This is a separate, less frequent service from the annual inspection.

• Cylinder pressure testing per manufacturer/code-required intervals
• Applies to units reaching their required testing age
• Confirms the tank can still safely hold pressure

New Extinguisher Installation & Placement

New or growing businesses in the Tampa area often need extinguishers installed to meet code before opening or passing an inspection. This service covers determining the right extinguisher type and count for the space, mounting them at code-compliant heights, and setting up the initial inspection schedule.

• Extinguisher type and quantity guidance based on space and occupancy
• Code-compliant mounting and placement
• Initial inspection tag and schedule setup